Ultimaker 3 Extended

Ultimaker
€ 4.470,95 Incl. tax

The Ultimaker 3 Extended is the most reliable dual extrusion 3D printer available. Achieve complex designs and improved 3D print performance, thanks to its unique auto-nozzle lifting and swappable print cores.

In stock (23 pieces)
In stock
Article number:
TRIULTPRI1440
The Ultimaker 3 Extended is the most reliable dual extrusion 3D printer available. Achieve complex designs and improved 3D print performance, thanks to its unique auto-nozzle lifting, professional build and support material combinations and swappable print cores.

The main featured specs of the Ultimaker 3 Extended are:
  • Build volume of 215 x 215 x 300mm
  • Layer Resolution up to 20 micron for 0.4mm nozzle
  • Print temperature up to 280°C
  • Dual extrusion with soluble support material
  • Swappable print cores
  • Heated build plate with active leveling

New hardware features

What are the new hardware features of the Ultimaker 3 Extended? First, there is the print head. With the Dual extrusion possibility you can combine build and water-soluble support materials to create complex mechanical parts and intricate surfaces. You can also choose to print with 2 colors of the same material. The auto-nozzle lifting system ensures a smooth, professional finish with every print!

Another new item are the print cores. Faster print core changes mean higher uptime and easier maintenance. With every Ultimaker 3 Extended you receive 2 print cores for build (AA) and one print core for support materials (BB). The way these print cores are made ensures lower clogging risks and a more reliable 3D printing experience.

The Ultimaker 3 Extended also has a powerful, low-noise fan system. Featuring two new radial fans and fan shrouds, it creates greater pressuree build-up for an improved airflow. Last is the LED status indicators. They alert the user when interaction is needed.

Superiour 3D printing experience

Off course Ultimaker also improved the software. CURA now has extensively tested preconfigured profiles to create a smoother, more seamless 3D printing experience. The brand new NFC scanner is a build-in material recognition system. It ensures your 3D printer is primed and ready for task. The Ultimaker 3 Extended detects and identifies the material on the reel holder and checks the correspondence  of a filament and print core being used.

The last item is the EEPROM print core chip, which memorizes the size and type of your nozzle, notifies you in case of misuse and, as a result, helps achieve higher print succes rates.

Some other changes

In comparison to the Ultimaker 2+, the Ultimaker 3 Extended works with a USB port. You can also connect your Ultimaker with your computer via the WiFi/LAN connectivity. Ultimaker also allows you to follow every stage of your project via the live camera!

The heated build plate

The last changes were made on the heated build plate. To say the active bed leveling! The capacitive sensor in the print head measures distances between the print bed and the nozzle, and the tilt angle is compensated by adjusting the Z-height in the first layers. The result? More accurate leveling and improved build plate adhesion.

Ultimaker also changed the design of the build plate. It is lighter and stiffer, which reduces vibrations and helps produce an unrivalled print quality. The build plate remains heated, so that you can print different materials with the Ultimaker 3 Extended.

In the box:
  • 1x PLA 350gr
  • 1x PVA 350gr
  • 2x AA print core
  • 1x BB print core
  • Magnalube
  • Unilube
  • Power supply
  • Networkcable
  • USB
  • Calibrationcard
Print technology: Fused Filament Fabrication
Maximum build volume: Single nozzle print: 215 x 215 x 300mm - Dual nozzle print: 197 x 215 x 300mm
Dimensions of the 3D printer: 357 x 338 x 488mm
Weight: 16.2 kg
Pre-assembled?: Yes
Nozzle diameter: 0.4 mm
Nozzle temperature: 180°C - 280°C
Filament diameter: 2.85mm
Layer Resolution: 20 - 200 micron
Print speed: 30 - 300 mm/s
Positioning precision of the axes: X: 12.5 / Y: 12.5 / Z: 2.5 micron
Calibration: Automatic
Printable materials: PLA, PVA, ABS, CPE, Nylon
Heated printbed: Yes
Stand alone printing via SD?: No
Stand alone printing via USB?: Yes
Stand alone printing via WiFi: Yes
LCD Screen: Yes
Software: CURA
File format: .stl, .obj, .3mf
Supporting OS: Windows, Mac, Linux
Open / Closed Source?: Open Source
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »
U maakt gebruik van een verouderde versie van
Internet Explorer, klik hier om deze te updaten.
x