Trideus is exceptionally closed on Friday April 26, 2019. More info on orders and delivery times
Polymaker
€ 159,95 Incl. tax

Polymaker PolyMide PA6-GF is a glass reinforced PA6 (Nylon6) filament with industrial engineering properties.

In stock
Instant deliverable
Article number:
TRIPOLCON1S3072

Polymaker PolyMide PA6-GF is a glass reinforced PA6 (Nylon6) filament with industrial engineering properties. This material has improved thermal and mechanical properties. The Fiber Adhesion Technology of Polymaker adds the outstanding layer adhesion to printed parts made with PolyMide PA6-GF. These parts are suitable for use in end-use parts.

Polymaker Technology
Not only does the PolyMide PA6-GF feature the Fiber Adhesion Technology, which results in better adhesion and smoother results, it also features the Warp-Free Technology. This allows your prints to reach an excellent dimensional stability, which leads to near-zero warping.  

How to print PolyMide PA6-GF
The settings to reach optimized results can be found at the bottom of this page. More importantly, it is not to only use the correct settings but also the right add-ons and accessories. The build plate and adhesion materials help to exclude the minimal chance of warping. We recommend using a flexible plate (for easy part removal) and Magigoo.

Because this material contains 25% chopped glass fibers, a regular nozzle will wear out much faster than when printing with regular materials. That is why we recommend a full-metal hot-end and nozzle, which can withstand temperatures of 280°C and higher with ease. For the nozzle, a stainless steel or ruby nozzle is a good solution. Possibilities are the Ruby Nozzle or the Print Core CC Red.

PolyMide PA6-GF is very hygroscopic, meaning that it will tend to absorb moisture very easy. An increased moisture in your material will lead to a lowered quality of your printed parts. That is why we recommend to use the PolyBox before, during and after printing.

Annealing your prints
We also recommend to anneal each print made with PolyMide PA6-GF. Annealing allows users to take advantage of the full mechanical and thermal properties of its prints. The process consists of putting the printed part in an oven at 90°C for 2 hours.

Print settings

Nozzle Temperature

280°C – 300°C

Build Platform

Glass plate, Magigoo, Flexible platform

Temperature of the Build Platform

25°C – 50°C

Fan speed

Turned off

Printing speed

60 mm/s

Recommended Environment temperature

25°C – 50°C

Recommended support material

PolyDissolve



Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »
U maakt gebruik van een verouderde versie van
Internet Explorer, klik hier om deze te updaten.
x