Polymaker PolyDissolve S2 is a soluble support material for the more industrial-grade materials. PolyDissolve S2 is compatible with PC, ABS and ASA. It has great adherence with these materials.
This specially designed material has excellent support interface and is soluble in warm alkaline water. For the solution of PolyDissolve S2, it is best to use 3DWash Solute Alkaline Powder to help you.
Solving PolyDissolve S2 also requires a special way of working, which is explained in the video below.
Printing PolyDissolve S2
Nozzle Temperature: 230°C – 250°C
Printing Speed: 30mm/s – 40mm/s
Bed Temperature: 90°C – 110°C
Bed Surface: Work on most surfaces designed
for high temperature materials.
Cooling Fan: OFF
Equipment Required for Dissolving:
3D Wash Solvent
Process of Dissolving PolyDissolve S2 Support
1. Install water pump
2. Install water heater and temperature controller, set temperature to 70-85°C
3. Create alkaline solution, You will require an equal weight of 3D wash to PolyDissolve™ S2
printed support. E.g. If you need to dissolve 100g of printed support, add 100g of 3D wash
to 4l of water.
4. Check pH (Target 10.5)
5. Submerse parts
6. Rinse in cold water