Now we know why the Canadians are so keen on their Maple Leaf. With ICE-wood ‘Marvelous Maple’ you get the finest results with that amazing maple look and feel.
ICE Filaments ICE-wood ‘Marvelous Maple’ is a modified PLA based type of filament, that smells and feels like wood. ICE-wood ‘Marvelous Maple’ contains particles of oak, which gives it that wooden look.
The features of ICE Filaments ICE-wood ‘Marvelous Maple’ are:
- Feels and smells like wood
- Easy to print at low temperature
- Very low warping
ICE Filaments is a brand of Trideus bvba. We have developed this line of filaments because we want to grant every customers wishes. At Trideus, we can test our filaments with different types of printers, what gives us the advantage develop a line of filaments that doesn’t focus on one printer alone, but that prints high quality prints on all the open source printers in our gamma. Also all the closed source printers that work with reels can use ICE Filaments materials.
We recommend to print ICE-Wood with nozzles of 0.4, 0.6 or 0.8mm. This way, the best results with ICE-Wood are guaranteed.
|material Type:||Polylactic Acid|
|Weight on the spool:||± 500 gr|
|print temperature:||205 - 235 °C|
|Melting Temperature:||150 °C|
|Print speed:||25mm/sec - 250mm/sec|
|Recommended temperature printbed:||± 35 - 60 °C, but not necessary|
|Diameter tolerance:||± 0,05 mm - 0,10 mm|
|Tensile Strength:||70 Mpa (MD) - 100 Mpa (TD)|
|Tensile Modulus:||1900 Mpa (MD) - 2300 (TD)|
|Impact Strength:||7,0 KJ/m²|