ICE-carbon is a stiff, impact resistant material. ICE-carbon is a 20% carbon fiber reinforced PET based filament. The result of this is are strong prints that have a heat resistance to 80°C. Next to this, ICE-carbon has a matt surface and almost no warping.
ICE-carbon is mostly used for RC components, drones, automotive parts,... It is not limited to these kind of prints, you can print anything you want with ICE-carbon.
ICE Filaments was tested on a variation of FDM 3D Printers. It is therefore printable on a multitude of machines that work with this technology, like for example Ultimaker, Raise3D, Felix, Craftbot and others.
ICE Filaments is a brand of Trideus bvba. We have developed this line of filaments because we want to grant every customers wishes. At Trideus, we can test our filaments with different types of printers, what gives us the advantage develop a line of filaments that doesn’t focus on one printer alone, but that prints high quality prints on all the open source printers in our gamma. Also all the closed source printers that work with reels can use ICE Filaments materials.
Be aware, we recommend usage of special nozzles (ex.g. the 0.5mm stainless steel nozzle from Olsson) because these have a better wear resistance.
|material Type:||Fiber reinforced PET|
|Weight on the spool:||± 500gr|
|Printing temperature:||225 - 245°C|
|Print speed:||25mm/sec - 250mm/sec|
|Recommended temperature printbed:||± 35 - 60 °C|
|diameter tolerance:||1,75mm: ± 0,05mm / 2,85mm: ± 0,10mm|
|Specific gravity:||1,19 g/cc|
|Yield stress 50 mm/min:||52,5 MPa|
|Yield strain 50mm/min:||4,2%|
|Strain at break 50 mm / min:||8,0%|
|Impact Strength Notched Izod 23 ° C:||3,8 kJ/m²|
|Heat Distortion Temperature:||80°C|