EcoPLA 'Gold'

€ 32,98 Incl. tax

Our EcoPLA filament range is a 3D printer filament range which is produced and extruded in the Netherlands. Our EcoPLA is a beautiful opaque 3D printer filament, which prints really smoothly.

In stock (1 pieces)
In stock
Article number:
TRIFORFIL3S0062

Our EcoPLA filament range has an excellent roundness and very tight diameter and ovalidity tolerances, which makes this filament a perfect match with all common desktop 3D printers. Printing with EcoPLA 3D printer filament will go very smoothly with basically all desktop 3D printers.

  • RepRap (Mendel, Huxley, Prusa)
  • Solidoodle
  • MakerBot (Replicator, Replicator 2, Replicator 2X)
  • Leapfrog
  • UP! Plus, Up! Mini
  • AND MANY MORE....!
PLA (Poly-Lactic Acid in full) is a thermoplastic which is extruded from the starch of plants, such as corn, cassava, sugarcane, cereals, or sugar beet. By being derived from biological resources this type of thermoplastic can be biodegradable under the right conditions (such as an active compost heap, with enough presence of oxygen) and therefore has a much lesser environmental impact than thermoplastics derived from fossil fuels. 

Product details

Our EcoPLA 3D printer filament is wrapped on a plastic spool which contains approximately 0.75Kg of filament. Our spool-wrapped EcoPLA filaments are packed in a silica sealed bag and come in a cardboard box. Please see below for more details with respect to the weight and packaging of our spool-wrapped EcoPLA 3D printer filaments: 

Filament Net Weight: ± 0.75 Kg
Spool Size (D x h): 200 mm x 55 mm
Spool Hub Diameter: 52 mm
Carton Box Size (L x W x H): 220 mm x 220 mm x 70 mm
Packaged weight 1.25 Kg

For more technical specifications about our EcoPLA 3D printer filament, please have a look a the 'SPECIFICATIONS' tab. 

General Tips & Tricks for printing with PLA filaments

The printing temperature guideline for printing with our EcoPLA filament is approximately 210°C. As each desktop 3D printer has its own unique characteristics, you might need to tweak around with your temperature settings a bit to get the best results. To obtain optimal results for your prints you need to take into account variables like your 3D printer’s nozzle diameter, your printing speed settings, and layer height. 

PLA has much less tendency to warp compared to ABS. Therefore it can be printed both with and without a heated print bed. However, if your desktop 3D printer does have a heated print bed it is recommended to set your print bed temperature to approximately 40° to 50° C.

A good first layer adhesion is of the utmost importance in obtaining the best results for your prints. There are several tricks to get the first layer of your PLA print to stick better to the print bed of your 3D printer.

  • Blue Masking Tape. PLA prints usually stick really well to blue masking tape. When preparing the print bed it is better to have tiny gaps between your strokes of masking tape, rather than having overlaps. Overlaps of smaller pieces of tape may cause difficulties later on during the print process. We have tested a wide variety of masking tapes and found that the best results can be obtained with Eurocel Blue Masking Tape.
  • Coat your print bed with hairspray. Like ABS, PLA has a tendency to stick really well to extra strong hairsprays.

Blue masking tape is unlikely to leave a residue on your print bed. A hairspray coating however will leave a residue on your print bed.

Color: Gold
Weight on the spool: ± 0,75 kg
Material: Eco Polylactic Acid
Transparency: Opaque
Diameter: 1.75 mm / 3 mm
Diameter Tolerance: ± 0.05 mm
Ovality Tolerance: 0,05 mm
Density (21.5°C): 1240 kg/m³
Melting temperature: 210°C
Print Temperature Guideline:: ± 210°C
Print Speed: 40 - 80 mm/s
Glass transition temperature: ~ 85 ° C
Impact strength: 16 KJ / m²
Elasticity: 480 Kpsi (MD), 560 Kpsi (TD)
Yield strength: -
By using our website, you agree to the usage of cookies to help us make this website better. Hide this message More on cookies »
U maakt gebruik van een verouderde versie van
Internet Explorer, klik hier om deze te updaten.
x