This filament will literally make your work shine! During the day it’s a beautiful creamy color which prints to a perfect smooth finish. In the dark your prints will start to glow like you would not believe.
All ColorFabb filaments are produced on transparent spools. It looks awesome and at the same time allows you to immediately see how much filament is left on the spool. We’ll seal the spool immediately after production and then seal the cardboard box again just to be save. This will make sure to keep the moisture out so when you unwrap the spool it’ll be super fresh.
FREQUENTLY ASKED QUESTIONS
So, why don't you use ordinary PLA?
We do use ordinary PLA, but add PHA for better yield at break. It makes our filament less brittle and tougher. This goes for all our filaments, except the transparent ones (green and violet). These are pure PLA.
And the processing temperature?
It's between 195 and 220 degrees Celsius.
|Weight on the spool:||± 0,750 kg|
|Diameter:||1.75 mm / 2.85 mm|
|Diameter Tolerance:||± 0.05 mm|
|Density (21.5°C):||1250 kg / m³|
|Melting temperature:||~195°C to 220°C|
|Print Temperature Guideline::||~195°C to 220°C|
|Glass transition temperature:||~ 85 ° C|
|Impact strength:||16 KJ / m²|